Fort Lauderdale Gate Pros provides professional cantilever gates in Fort Lauderdale, FL for residential and commercial properties across Broward County. Cantilever gates are the right answer on a Fort Lauderdale property for one reason above all others: nothing touches the ground. No track to fill with sand, no wheels sitting in a puddle of brackish water after a high tide.
Everything moves instead through two roller truck assemblies mounted on posts, which means all the wear and all the corrosion concentrate into two small components. That is a good trade if those components are specified for the environment and a poor one if they are not. Enclosed truck housings keep spray off the rollers, and the truck bolts should be stainless with the same isolation washers we use everywhere else on an aluminum gate.
The catch is space. A true cantilever needs a counterbalance tail behind the opening, usually around half the clear opening again. On a fifty foot wide isle lot with a side yard setback, that tail frequently does not exist, and forcing it means the gate parks across a walkway or a hose bib or the AC pad. A twenty foot gate wants thirty feet of clear run and a post set well back from the apron.
We will tell you when that is the case rather than build it. On a twelve foot opening with no tail room, a bi-parting swing pair costs less, uses hardware that is easier to service, and gives up nothing you would notice. Cantilever earns its money on wide openings, uneven aprons and driveways that flood, not on every job. Ask us to price both and compare the hardware schedules rather than the totals at the bottom.
Construction standards apply to the gate itself, not just to the operator. ASTM F2200 asks that a cantilever leaf carry no exposed rollers within reach, that gaps in and under the leaf be small enough that a hand cannot pass, and that the tail be screened where it sweeps. It also asks for positive stops at both ends of travel so a leaf cannot run off its trucks.
Maintenance is short and specific. Rinse the truck assemblies with fresh water on the same schedule you rinse anything else outdoors, check the roller housings for grit twice a year, and look at the bottom guide rollers, which sit lowest and therefore die first.
One design note worth raising early: the tail is visible when the gate is open. On a waterfront frontage where the view along the street matters, we detail the tail end deliberately rather than letting it end in a bare cut extrusion. A capped end also keeps the inside of the section dry, because an open extrusion end is where condensation collects and never leaves.
With 15+ years of experience, our insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, marine-grade powder-coated aluminum, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Fort Lauderdale and nearby communities including Pompano Beach, Oakland Park, Wilton Manors, Lauderdale-by-the-Sea.
What We Handle
Everything our cantilever gates in Fort Lauderdale covers
One crew, one point of contact, and the full range of cantilever gates work in Fort Lauderdale, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- cantilever slide gates
- commercial cantilever gates
- no-track slide gates
- cantilever gate rollers
- marina and boatyard gates
- cantilever gate repair Fort Lauderdale
- heavy-duty slide gates
- flood-prone driveway gates
- industrial yard gates
- cantilever gate operators
- warehouse perimeter gates
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fort Lauderdale services.
Materials, equipment and how we do cantilever gates
The difference between cantilever gates that lasts and cantilever gates that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with wrought iron and ornamental steel fabrication, marine-grade powder-coated aluminum, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fort Lauderdale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of gate work in Broward County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do cantilever gates outside Fort Lauderdale
Fort Lauderdale Gate Pros covers Fort Lauderdale and the surrounding communities of Broward County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Cantilever Gates in Pompano Beach, FL — Broward County, incorporated as the Town of Pompano on July 3, 1908, population 112,046 at the 2020 census
- Cantilever Gates in Oakland Park, FL — Broward County, incorporated as Floranada on November 25, 1925, population 44,229 at the 2020 census
- Cantilever Gates in Wilton Manors, FL — Broward County, incorporated as a village on May 13, 1947, population 11,426 at the 2020 census
- Cantilever Gates in Lauderdale-by-the-Sea, FL — Broward County, incorporated November 30, 1927, population 6,198 at the 2020 census
- Cantilever Gates in Lighthouse Point, FL — Broward County, incorporated as a town on June 13, 1956, population 10,486 at the 2020 census
- Cantilever Gates in Deerfield Beach, FL — Broward County, incorporated as a town on May 12, 1939, population 86,859 at the 2020 census
Start on the Fort Lauderdale Gate Pros homepage for a free estimate, or call (844) 938-4596 and describe the job.
Why Fort Lauderdale Chooses Fort Lauderdale Gate Pros
- ✓Over 15 years installing and automating gates across Broward County
- ✓In-house metal shop — we weld and powder coat our own gates rather than drop-shipping them
- ✓Marine-grade aluminum and hot-dip galvanized steel specified for coastal salt air
- ✓Waterfront, canal-front and marina-community gate work is a specialty, not a sideline
The standards behind cantilever gates
Quality here is not a matter of opinion — it is written down. The cantilever gates work we do in Fort Lauderdale follows published industry standards: DASMA is the standards body for door and access systems, and UL Solutions publishes UL 325, the safety standard for automatic gate operators. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every cantilever gates project in Fort Lauderdale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 938-4596 for a free cantilever gates free estimate in Fort Lauderdale, or request a quote and we'll get right back to you.